Oil Dispensing System
Gravimetric Oil Dispensing System
|Accuracy||+/- 10 ml for 5 lts & +/- 50 ml for 60 lts|
|Power Supply||230 V 50Hz & 415 V 3 Phase for motors|
|Capacity||500 ML TO 5 LTS AND 5 LTS TO 60 LTS|
|Number Of Hoses||1 OR 2 AS PER CUSTOMER REQUIREMENT|
Our Oil Dispensing systems are weight based and works on Loss in Weight principle. They are used by all Automobile manufacturing Companies in their Production line.
Oil is stored in an overhead tank or in barrelS. The filling pump installed in our system pumps the oil from the overhead line to the weighing tank as per the fill set quantity. This weighing tank is supported on 3 load cells. The oil will be further pumped into the Gear Box,Engine/Axle/Steering assembly by loss in weight principle. The micro controller or Plc based panel has keyboard to set the required filling and dispensing quantities. The operator places the filling gun and selects the quantity through the Switch. On pressing the start button, the Dispensing operation starts and will be completed automatically on achieving the set quantity. An audio signal and visual indication will be provided for indicating the status of dispensing. On completion of dispensing operation, the filling pump will be immediately switched on and fills the oil from the main storage tank to the intermediate weighing tank as per the fill set quantity and gives necessary ready signals to the operator for the next dispensing.
Engine / Gear Box / Steering/ Axle Oil
Filling Machine-Weigh Based
500 ml to 5 ls
5 lts o 60lts
+/- 50 ml
Filling Nozzle (NRV)
Pneumatically operated 2 position SS 304 valve
Features of control Panel
Coarse, fine & in-flight setting. Weight achieved & cumulative quantity display.
+10 to + 50°C
- Delivery Time: 4 WEEKS
Dual Oil Dispensing System
|Minimum Order Quantity||1 Piece|
|Fuel Type||LUBE OIL, DIESEL|
|Accuracy||+/- 50 ML UPTO 60 LTS|
|Number Of Hoses||2 WITH 5 M LENGTH EACH|
|Voltage||230 V 50 HZ 3 PHASE 415 V|
|Color||AS PER CUSTOMER SPECIFICATION|
The operator can select the quanity of oil to be dispenses either by bar code scanning or by RFID. The engine gets filled with the quantity already fed into the system by RECIPE MANAGEMENT.
There are 2 filling nozzles which work independently and there are suitable interlocks provided for avoilding any anomalies in choosing of oil or quantities.
- Delivery Time: 8 WEEKS